JEFF PITTMAN / UNITED STATES & CANADAFind your oilContact JeffTrack your orderAMSOIL Dealer #30734402
SYNTHETIC OILINDEPENDENT AMSOIL DEALERShop AMSOIL

AMSOIL FOR DEMOLITION CONTRACTORS

Lubricants for demolition contractors.

Hydraulic oil, filters, heavy grease, diesel oil, and gear lube for demolition excavators, hydraulic breakers, shears, skid steers, and loaders.

Questions: [email protected] · Every AMSOIL link on this page carries dealer #30734402.

Products for demolition contractors

Breaker tool paste is not in this catalog

Hydraulic breaker bushings use a high-temperature chisel paste specified by the hammer maker. This catalog does not carry chisel paste; use the hammer maker’s product.

Dust, silica, and site rules

Concrete and masonry dust is abrasive to machines and regulated for workers. Follow your silica control plan and keep air filters and breathers on schedule.

Products by equipment.

Confirm the lubricant type, grade, and specifications in each equipment manual before ordering.

Carriers and high-reach excavators

Demolition carriers cycle attachments hard and run hot hydraulic oil. Match the maker’s grade and change filters on the hammer-work schedule.

Pins, booms, and attachments

Shears, processors, and grapples list their own grease points; dust and shock loads make intervals short.

Skid steers and loaders

Demolition skid steers and wheel loaders follow their engine and hydraulic makers.

Oil analysis

Sampling hydraulic and engine oil helps catch dust and overheating before a pump or engine fails.

Which account fits your business?

ORDER THROUGH INDEPENDENT AMSOIL DEALER #30734402

Ready to order, or have a question first?

Shop AMSOIL directly with Jeff’s dealer number already attached, or open a business account. AMSOIL handles pricing, checkout, and shipping. If you contact AMSOIL another way, give them dealer number 30734402.

Prefer to talk it through? Email Jeff at [email protected] with your equipment, the fluid now in use, and your approximate volume.

Frequently asked questions

Can I use grease instead of chisel paste?

Use what the breaker maker specifies. Most require a chisel paste rated for the temperature at the tool bushing.

How often should demolition hydraulic filters be changed?

At the maker’s interval for breaker work, which is often shorter than for digging.

General maintenance information. Always follow your equipment manufacturer’s requirements and the current product data. Product availability, pricing, and account terms are set by AMSOIL.

Equipment guides for this industry

BASED IN NEWPORT. SERVING U.S. & CANADIAN CUSTOMERS.

Let’s get you pointed
in the right direction.