FARM EQUIPMENT
Gearbox oil, PTO driveline grease, and slip clutch care for 3-point and pull-type rotary cutters and brush hogs.
Questions: [email protected] · Every AMSOIL link on this page carries dealer #30734402.
A friction slip clutch can seize after a winter outside. Follow the maker’s procedure for loosening and resetting it before the first cut.
Wire and vines wrapped around the output shaft cut seals; clear them and recheck the gearbox level.
Confirm the fluid type, grade, and specifications in the rotary cutter (brush hog) maker’s manual before ordering. These examples are not a fitment result for a specific machine.
Cutter gearboxes list a gear oil, often an 80W-90 or 85W-140 EP grade; a few use a semi-fluid grease. Check the maker’s spec and fill to the level plug.
Gear oil
SEVERE GEAR 80W-90 synthetic gear lube for compatible gear applications, including demanding towing and hauling use.
Product details Shop at AMSOIL ↗Gear oil
SEVERE GEAR 75W-90 synthetic gear lube for compatible gear applications, including demanding towing and hauling use.
Product details Shop at AMSOIL ↗Gear oil
80W-140 Long Life Gear Lube for compatible differentials and gear assemblies.
Product details Shop at AMSOIL ↗Grease the crosses, telescoping tubes, and shield bearings at the hour interval on the driveline decal.
Grease & assembly lube
NLGI #2 polymeric off-road grease for compatible equipment components in demanding earthmoving and agricultural service.
Product details Shop at AMSOIL ↗Grease & assembly lube
A synthetic multi-purpose grease for compatible bearings and chassis lubrication points.
Product details Shop at AMSOIL ↗Grease tailwheel spindles, hubs, and pivots as charted.
Grease & assembly lube
NLGI #2 polymeric off-road grease for compatible equipment components in demanding earthmoving and agricultural service.
Product details Shop at AMSOIL ↗ORDER THROUGH INDEPENDENT AMSOIL DEALER #30734402
Shop AMSOIL directly with Jeff’s dealer number already attached, or open a business account. AMSOIL handles pricing, checkout, and shipping. If you contact AMSOIL another way, give them dealer number 30734402.
Prefer to talk it through? Email Jeff at [email protected] with your equipment, the fluid now in use, and your approximate volume.
The gear oil the cutter maker lists, commonly an 80W-90 EP gear oil.
Every 8 hours is common; follow the decal and manual.
General maintenance information. Always follow the equipment maker’s requirements and the current product data. Product availability, pricing, and account terms are set by AMSOIL.
Open a commercial account with dealer #30734402
https://www.amsoil.com/business-opportunities/get-a-commercial-account/?zo=30734402
Jeff Pittman · A1 Synthetic Oil · Independent AMSOIL Dealer #30734402 · Newport, Washington · [email protected]
BASED IN NEWPORT. SERVING U.S. & CANADIAN CUSTOMERS.
