FORESTRY AND PROPERTY EQUIPMENT
Gearbox and roller bearing lubrication for wood and feed pellet mills, including the high-viscosity gear oils A1’s catalog does not carry.
Questions: [email protected] · Every AMSOIL link on this page carries dealer #30734402.
Ring-die roller bearings are greased often; too little runs hot, too much can end up in the pellets.
A lighter gear oil than the plate lists can shorten gear life in a heavily loaded mill; follow the plate.
Confirm the fluid type, grade, and specifications in the pellet mill maker’s manual before ordering. These examples are not a fitment result for a specific machine.
Large ring-die mill gearboxes commonly call for ISO 220–460 industrial gear oil, which A1’s catalog does not list. Small flat-die mills sometimes list an SAE gear oil; check before using one.
Gear oil
SEVERE GEAR 75W-140 synthetic gear lube for compatible gear applications, including demanding towing and hauling use.
Product details Shop at AMSOIL ↗Gear oil
80W-140 Long Life Gear Lube for compatible differentials and gear assemblies.
Product details Shop at AMSOIL ↗Roller bearings run hot near the die; use the high-temperature grease and quantity the maker specifies.
Grease & assembly lube
Synthetic High-Viscosity Lithium-Complex Grease for compatible bearings and equipment lubrication points.
Product details Shop at AMSOIL ↗Motor bearings and PTO or engine drives follow their makers.
Grease & assembly lube
A synthetic multi-purpose grease for compatible bearings and chassis lubrication points.
Product details Shop at AMSOIL ↗Diesel oil
15W-40 Signature Series Max-Duty synthetic diesel oil for compatible diesel engines in demanding service.
Product details Shop at AMSOIL ↗Feed mill screws and conditioners may need food-grade lubricants where the maker requires them.
Grease & assembly lube
X-Treme Synthetic Food-Grade Grease for compatible bearings and equipment lubrication points.
Product details Shop at AMSOIL ↗ORDER THROUGH INDEPENDENT AMSOIL DEALER #30734402
Shop AMSOIL directly with Jeff’s dealer number already attached, or open a business account. AMSOIL handles pricing, checkout, and shipping. If you contact AMSOIL another way, give them dealer number 30734402.
Prefer to talk it through? Email Jeff at [email protected] with your equipment, the fluid now in use, and your approximate volume.
A1’s catalog does not list ISO 220–460 industrial gear oil; use the oil the mill maker specifies.
The high-temperature grease the mill maker lists.
General maintenance information. Always follow the equipment maker’s requirements and the current product data. Product availability, pricing, and account terms are set by AMSOIL.
Open a commercial account with dealer #30734402
https://www.amsoil.com/business-opportunities/get-a-commercial-account/?zo=30734402
Jeff Pittman · A1 Synthetic Oil · Independent AMSOIL Dealer #30734402 · Newport, Washington · [email protected]
BASED IN NEWPORT. SERVING U.S. & CANADIAN CUSTOMERS.
